Steelroll i100 elite - sr3 lpcb Approved

i100 sr3 security shutter

APPLICATIONS

A shutter for use where security is a high priority, such as entrances to schools, hospital restricted areas, computer and server rooms and general retail outlets; up to 35m². The i100 Elite has been tested by the Loss Prevention Certification Board LPS1175 (7.0), rated SR3, and awarded 'Secured by Design' status. Suitable for internal face fix installation only. CE marked to harmonised product standard BSEN 13241-1:2003. 

The i100 Elite is also available with an LPS1175 (7.0) SR4 rating; our most secure shutter. See the i100 SR4 for more information.

Locking mechanisms 

The Steelroll i100 incorporates a bullet locking system situated 1 meter from ground level, fixed to each guide channel; side anchors inside guide; central ground anchor on the bottom lath on shutters over 3 meters wide. Lock isolator kits available to prohibit operation of the shutter while in the locked condition.

Curtain Slat

Double skinned mild steel insulated slat with 81mm face and optional insulated core. Wall thickness 1.2mm. 

Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour or Plastisol finish (surcharges apply). View our stocked powder coating colours here and our Plastisol range here.

Visible Surface :: 81mm
Profile Height  :: 100mm
Weight per m²     :: 37kg
Maximum Width  :: 7000mm
Maximum Surface  :: 10m²  (tubular), 35m² (outboard)

Enclosure / Housing

Housing manufactured from steel sheet. End caps are fabricated from steel plate.

Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.

TUBULAR MOTOR:

Guide Height (mm)        Plate Size* (mm)                                                   1500                               400                                                                 2500                              450                                                                 3250                              500

OUTBOARD MOTOR:

Guide Height (mm)        Plate Size* (mm)                                                      1500                               400                                                                 2500                              450                                                                 3250                              500                                                                4000                              550                                                                 5000                              600

*Plate sizes shown as a guide only and may increase dependent on shutter width.

Guide Channels / Bottom Slat

Guide channels are 85mm reinforced wind guides.

Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies). View our stocked powder coating colours here.

Operation

Electric: Tubular Motor = NRG Econom tubular motor & internal rocker or external key switch as standard (range of other motors available for a surcharge). Safety brake as appropriate to comply with legislation. Manual override facility & crank handle as required (surcharge applies). Numerous control option variants such as group or mobile phone activation. Tubular motor available on i100 SR3 only.

Outboard Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, chain drive or in-line design. Final configuration will be project specific but all motors incorporate a chain manual override facility. Numerous control option variants such as timed closure, group or mobile phone activation.

i100sr3slatprofile
LPCB Logo - P76 Elite (Internal & Reveal).png
Aluroll Security Shutter Secure By Design Approved Product
POWDER COATING

POWDER COATING

Steelroll i100 elite - sr3 LPCB Approved DATA SHEET

Click here to view, download or print.