Steelroll FS240 - 4 Hour Fire Shutter

Fire Shutter - Abraham Moss 011 .jpg

APPLICATIONS

High security commercial and service sites, up to 50m², with 4 hour fire rating to stop spread of fire through an opening. The Steelroll FS60 has been tested at Exova Warringtonfire under BS EN 1634-1:2008 test conditions, and assessed to BS EN 476-22:1987, to contain fire within particular parts of a building. In the event of a fire alarm, the shutter automatically descends by operation of the motor. Further failsafe devices to ensure higher levels of response to a fire outbreak or alarm. 


CURTAIN SLAT

Single skin 76mm curved steel. Standard galvanised finish. Wall thickness 0.7mm, 0.9mm, or 1.2mm, depending on overall shutter opening width. 

Colours: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).  View our stocked powder coating colours here.

Visible Surface :: 76mm
Weight per m²     :: 9.8kg / 12.5kg / 16.7kg  (dependant on wall thickness)
Maximum Width  :: 12000mm
Maximum Surface  :: 24m² to 50m² (dependent on motor and barrel support options).

ENCLOSURE / HOUSING

Manufactured from 0.8mm galvanised steel sheet.
End caps are fabricated from 5mm+ steel. A barrel support frame at the centre of the housing may be required in some applications. 

Colours: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).  View our stocked powder coating colours here.

ALL MOTORS, WITHOUT BARREL SUPPORT FRAME:

Guide Height (mm)    Plate Size* (mm)
            2500                       305
            4000                       355
            6000                       400 

TUBULAR MOTOR, WITH BARREL SUPPORT FRAME:

Guide Height (mm)    Plate Size* (mm)
            2695                       305
            4000                       355
            5000                       400

OUTBOARD MOTOR, WITH BARREL SUPPORT FRAME:

Guide Height (mm)    Plate Size* (mm)
            5000                       400
            6000                       450

*These sizes apply to shutters without barrel support frames and will vary where barrel support is required. Plate sizes shown as a guide only and may increase dependent on shutter width.

GUIDE CHANNELS / BOTTOM SLAT

Galvanised steel sections with strengthened T-shape bottom bar. Guide channel depth will vary dependent on application from 50mm to 100mm.

Colours: Galvanised finish as standard. Option to powder coat any RAL / BS colour (surcharge applies).  View our stocked powder coating colours here.

Note: the guide channels are bolted to fixing angles or steel box sections dependent on the application. See drawings on this sheet.

OPERATION

Tubular Motor = Single phase tubular motor operated via key switch.

Inline Motor = Single phase inline chain driven motor (three phase option available) with push button control, chain override, fusible link and solenoid release as standard. 

All shutters can be connected to a fire alarm via an interface panel so they automatically descend in the event of an alarm signal. 

CE compliant to all relevant European directives and regulations.

FS60 120 240 Slat Profile - Low Res .jpg
Fire Shutter Red Slats
Fire Shutters - Box Detail
aluroll roller shutter 5 year warranty
POWDER COATING

POWDER COATING

STEELROLL FS240 - 4 HOUR FIRE SHUTTER Data sheet

Click here to view, download or print.